How to Install Electric Car Charger in Your Home

Speed up Electric Vehicle Charging Points project, Devon urged - Devon Live

In an effort to reduce our dependence on fossil fuels, more and more people are turning to electric cars as an alternative to conventional cars. While electric cars can be charged using electrical power from home, it’s a bit more involved than simply plugging in your car. In order to maintain the highest level of energy efficiency while charging your car, you will need a home electric charger. However, installing one can be quite a hassle if you don’t know what you’re doing. Luckily, we’re here to help! We’ll walk you through everything you need to know before you have EV Charger installation Exeter.

 

What type of electric car charger should you get?

Before you install a home electric car charger, make sure to know what type of charging system you want to install. You’ll want to choose a home electric car charger based on its charging speed, the type of power you have available to you, and your budget. If you live in a home with a standard electric outlet and an electric car, you’ll want to look into a charging system with a charging speed of at least 2 amps. 

If not, your car will likely charge slowly, if at all. Additionally, you’ll want to install a home electric car charger that uses a 120-volt or 240-volt outlet. Depending on where you live, you may have access to both a 120-volt and a 240-volt outlet. If so, you’ll want to choose a charger that supports both voltages. If not, you’ll have to replace your charger as your home’s voltage changes.

 

Installation requirements

Before you start installing your home electric car charger, you’ll want to make sure you have the right equipment. Make sure you have the right electric cable and connectors, a cordless drill with a 1/2-inch chuck, a nut set or socket set, a tape measure and pencil, and a window cleaner. You’ll also need a pair of adjustable gloves, a cordless screwdriver, and a pair of scissors. 

Be sure you have the right sized hole saw for cutting through your walls and a pair of concrete pads. For some chargers, you’ll also need to have access to a welder, a welder’s helmet, and a circuit diagram to verify that you’re not interrupting any other electrical systems in your house.

 

Where to install your home charger

Before you install your home electric car charger, you’ll need to determine where the best place is for your charger. Ideally, your charger should be out of the way and not be extremely hot while charging. You’ll also want to avoid installing your charger in an area that is prone to moisture, like a basement or a garage. 

Your home charger should be installed as high and as close to your wall as possible. There are a few reasons for this: 

– It will be easier to plug into. 

– It will provide the highest level of energy efficiency. 

– It will be less likely to get damaged.

Conclusion

Thanks to the rising popularity of electric cars, now more than ever, homeowners are seeking ways to reduce their carbon footprint. If you live in a place with fairly easy access to electricity, installing a home electric car charger is one way you can go green. Choosing the right home electric car charger for your home will ensure you get the most out of your home charging system.

Leave a Reply

Your email address will not be published. Required fields are marked *