Business

How to Sharpen Chainsaw Chains

There are two types of chainsaw chains: carbide-tipped and regular metal. Carbide-tipped chains have been on the market for decades and are primarily used in firefighting. They don’t dull as quickly but are also very expensive and hard to sharpen. Carbide-tipped chains are also brittle and chip easily when used with abuse. It is important to understand how to properly choose chainsaw chains.

When replacing a chain on your chainsaw, you should first determine the pitch. The pitch is the distance between drive links, usually measured in inches. Chainsaw manufacturers determine the pitch by measuring the number of rivets on the chain and using a formula to calculate the distance between the links. The larger the pitch size, the larger the chain and therefore, the heavier it is. Make sure to read the chainsaw owner’s manual for more information.

A sharp chain is essential for efficient cutting. A dull chain will result in smaller chips and less force, which will increase the amount of vibration. Sharp chainsaw chains also last longer compared to dull ones. This is because they don’t have to endure as much wear and friction as a dull chain. So, be sure to check your chain often to make sure it’s in good condition. It may even take a few visits to the hardware store to sharpen the chain.

Before starting to sharpen the chain, be sure to use a wire brush to remove any debris that might clog up the teeth of the grinding machine. Always hold the file at a 90-degree angle to the guide bar and a 30-degree angle to the straight line of the chain. Maintain this angle throughout the entire grinding stroke. If you want the chainsaw to perform at optimum performance, you should follow these simple steps. They will help you to sharpen your chainsaw properly.

A sharp chain will cut better when properly tensioned. You can adjust the tension of your chainsaw by loosening the retaining nuts on the guide bar. You may also want to use a flat file to sharpen the chain. Ensure that the chain is properly tensioned after sharpening the teeth. You don’t want the teeth to sag and fall out of the groove. The saw blade will get damaged more quickly if the chain is too loose.

If you have a STIHL chainsaw, you can choose from three types of saw chains. Usually, you will find a 3/8″ PM3 or 1/4″ PM3 saw chain. To know which one you need, look at the chainsaw’s manual or the manufacturer’s packaging. The information you need will also be printed on the side of the guide bar. If the chain is not marked, look for a file with the correct size.

Besides carbide chains, you can also purchase a diamond-tipped chain. Diamond-tipped chains are more expensive but are great for cutting rocks and concrete. You should use a bar designed for the type of material you plan to cut. Some manufacturers offer a special feature such as an adjustable chain tension. Some manufacturers even design their saws to be compatible with Intenz bars.